Packages
Ready-made DWDM packages for first projects: fiber route protection, a 100G two-site link, a multi-service backbone and an 800G DCI evaluation. Quoted within 24 hours.
Fiber route protection kit
ISPs and operators whose links go down when a fiber is cut. A single fiber cut takes the route down until a crew finds and splices the break.
- OLP modes: 1:1, 1+1, 1-1 and BIDI, with real-time optical power monitoring
- OTDR card: 1625 nm ±10 nm, 30–40 dB dynamic range, polling in eight directions
Route length and loss of both fiber paths, and the equipment at each end.
100G two-site starter
Connecting a POP to an IX, a data center or another POP over one fiber pair. More 100G ports are needed between two sites, but there is no spare fiber.
- DCI3100: 16 × 100G QSFP28 ports, up to 1.6T per 1RU, two units stack to 3.2T
- 1+1 line protection, 1+1 power backup, -10 to 60 °C operation
- EDFA typical gain: 12 dB booster, 25 dB line or pre-amplifier
Distance and loss between the sites, and how many 100G ports you need now and later.
Multi-service DWDM backbone
Regional ISPs carrying a mix of 1G, 10G and 100G services over the same fibers. Every new service takes another fiber pair, and the backbone is running out.
- AAWG: 40, 48, 80 or 96 channels at 50 or 100 GHz spacing
- OEO: up to 32 routes at 155M–10G or 16 routes at 40/100G, SNMP and Web management
The services on each route (rate and count), distances and losses, and the optics you use today.
800G DCI evaluation pack
Data center and carrier teams moving links to 400G/800G per wavelength. You need to prove 800G on your own fiber before committing to a volume order.
- T8E2: two pluggable 400G/800G CFP2-DCO line interfaces, 16QAM, oFEC, 96 C-band channels
- DCI5800 line side: 100/200/400/800G per wavelength
- Engineering samples in approximately 1–2 weeks; the sample fee is credited against your volume order
The route (distance, loss, amplifiers), client ports and the date you want to test.
Request a quote · We reply to inquiries within 24 hours.